Slow-wave-type microwave radiation type microwave dryer and dryer
     Slow-wave-type microwave drying is transmitted wave field, the electromagnetic waves along the transmission direction, slower than the speed of light, so called slow-wave type. Waveguide transmission device in a desiccator electromagnetic faster than the speed of light to be transmitted.
     Slow type microwave drier applied in a short time a lot of power. Therefore, use of the heating dielectric loss coefficient is small, a larger surface area, smaller than the heat capacity of the sheet material.
     ① helix electromagnetic microwave drier forward along the helix, so that the axial velocity, thereby increasing the field strength in the material line or cylindrical axis of the spiral line with the electromagnetic field of it may be allowed to achieve the heat exchange member dried purposes.
     ② trapezoidal rectangular waveguide microwave drier set at a ridge, the ridge waveguide wall surface of the positive die opening intermittently for many of the axis of the waveguide slot post. Since the microwave power is concentrated ladder spread around the groove, so the availability of a strong electric field near the groove. Material (especially a sheet or wire material) through the slot near the easily obtain high efficiency of heating and drying.
     Microwave heating dryer trapezoidal flat heating and drying but open, not only easy to operate, and can easily eliminate the heating steam generated in the drying process, eliminating the humidity and ventilation equipment.
Radiating the microwave energy from the microwave drier bell radiated surface of the material to be dried, and penetrate into the interior material. This dryer is simple and easy to achieve continuous heating and drying, but prone to leakage of microwave energy.

主要产品推荐： 烘干机  干燥机  杀菌机  微波设备